Build List
-
Active Filters:
beam
C-beam Machine - Modesty
Modified C-beam Machine. Taller (30 cm) C-beam uprights in gantry, and longer 750 mm frame in Y direction. XL gantry plate on X (and Z?). Y will have additional 700 mm SBR16 rails as extra support and slightly raised bed to fit above stepper motor. Approx. machinable area of 370 x 370 mm.
Build Author EvanH Views 869
"Hawk" Heavy-duty dual-Z pseudo C-Beam
A compact, strong machine with very high Z clearance, yet can still mill aluminium easily.
Build Author Ryan Lock Views 122924
WorkBee CNC Machine
The WorkBee is our latest CNC Machine and is a culmination of all our experience, feedback, and suggestions from selling the OX CNC Machine over the past 2 years. The WorkBee is capable of accurately cutting foams, woods, plastics or aluminum at depths greater than 25mm to 0.2mm accuracy or greater.
Build Author Mark Carew Views 252286
C-Beam® Machine - Plate Maker
This C-beam Machine is an in affordable CNC plate maker and 3D carving machine!
Build Author that-jim Views 41176
LINEAR RAIL SPHINX 55 (Blue OX plates)
Machine based on Sphinx 55 built with linear rails.
Build Author Cam Garrett Views 2170
Sturdy Motorized Photographic Copy Stand
i would like to build a sturdy motorized photographic copy stand. i have hobbled together a hand crank version using a used umbrella pole but it is not suitable as it is awkward and wobbly.
Dash X Direct, Cross-Beam 3d Printer
This is the next version of Dash, now operating much closer to its potential. Please message me if you need anything, such as Simplify3D settings, material information, design intent etc. Since the Pack-and-Go zip file is fairly large (120mB), here is a link where it can be downloaded: https://drive.google.com/file/d/1Q3ygyo_tTrB4UYIV62_wtCSCbWuE3krT/view?usp=sharing Note: I use Solidworks 2022, acquired through their Solidworks for Makers program (check it out!). A super deal at $100/yr
Y table for LEAD Lathe - essentially a High Z Cbeam XL
I built the lathe as a dedicated rotary axis, but I soon realized I could have a back up CNC for very little expense.
Build Author Rick 2.0 Views 14549
C-Beam Mini Mite
A small system with a big bite. Design achieves a good balance between machine size vs. build area, rigidity and ease of construction all while keeping build cost as low as possible.
C-beam charmer
Double C-beam Y axis 500mm., Double 2080 X axis 600mm. , C-beam Z axis 250mm, TB-6600 drivers, MKS-DLC32v2 GRBL w/wi-fi and blue tooth
My C-Beam build and modifications
Modified C-Beam which I plan to add a laser module and eventually convert to C-Beam XL size.
Build Author Steve Hall Views 2984
Cartesian Style Build UK
Another Cartesian style build with parts from the UK, US & China.
Build Author nickchnv Views 9944
Rigid Compact Desktop C-BEAM
This modified C-Beam, is a compact, powerful and affordable desktop CNC.
Build Author Kyo Views 22033
Sphinx 55
A Sphinx build to inspire and encourage all those who want to get started with cnc to check out Opensbuilds line of machine bundles and hardware.
Another C-Beam machine
This is basically a Sphinx variant with few changes of my own...hope it'll work.
Improved CBM
Yet another build of an improved C-Beam Machine, improving stiffness, size, versatility, and strength without increasing costs much.
Build Author Rob Taylor Views 15571
M4: 1510SS Heavy Mk.I
A 1500x1200mm, 20mm rail and 1610 ballscrew, heavy-duty, four-axis gantry machine. As high speed as spindle power MRR will allow for. Approx 4 x 3 x 1ft travels, intermediate size between benchtop and floor-scale units. Aiming at $10-15k machine in the $3k region.
Build Author OpenBuilds Views 5345
V-Slot Ventilator
The idea is to make a simple effective ventilator, studying the concept of using a simple push process with and actuator.
Build Author Joe F Views 6823
Rack and Pinion Cartesian Mill
This is a rework of a previous build I did on here, a mostly printed cartesian CNC. Initially intended to just be an update to that, but so many things changed including the linear motion and every single part has been modified significantly that I felt as though it deserved a whole new build.
Build Author Neil Rosenberg Views 35099
Dash-X 3D Printer: Innovative design
Cross-beam Cartesian 3d printer with dual master/slave lightweight fiberglass drive shafts, BMG style extruder with Bowden (Capricorn) tubing. Hot end is Creality Ender 3 style with two fans and BLTouch for autoleveling. Filament runout sensor is also included.
Model train lift - scale HO
This build is about a model train lift in a secure and dust free storage. It is a roll on/roll off concept for a model train layout.
Build Author Kenneth Witthuhn Views 7266
Openbuilds CNC (witthuhnCNC XKLBR-1S)
Based on the popular C-beam / V-wheel design, with the largest available work area, relative to machine size. Screw driven with anti-backlash, integrated drag chains, Carbon fibre gantry plates, Openbuilds BlackBox Controller (USB), Transformer & kill switches, with internal wiring, limit switches & Nema 23 motors.
My C-Beam machine...from 500 to 1000mm base
C-Beam machine - 1000mm base.
C-Beam Dust Shoe
A short description of the dust shoe I made for my machine.
My C-Beam machine...
A C-Beam machine design, strengthened with extra brackets and plates. GRBL controlled, opto-isolated inputs, jogging box.
Build Author Kims3DIY Views 16643
Beamlazer Laser cutter CO2 100W
Hi everyone, im new to the world of lasercutters but i have been granted access for a Trotec laser for a while with old firmware and only compability trought Windows XP. Then i decided to build my own laser, with some easier workflow and support for Windows 10. Since im still a student i have limited resources, so i will try too use scrap parts as much as possible. I will publish photos and updates during my build continously. Gladly taking advices from others.
Build Author Mark Carew Views 139951
OpenBuilds MiniMill
This OpenBuilds Mini Mill is a great go-to desktop sized CNC milling plate / part maker and 3D carving machine!
Rise of the Sphoenix
I am building a Sphinx 55 from the bones of my old C-Beam machine. Rising from the ashes so to speak.
Build Author Mark Carew Views 19410
C-Beam® XLarge Linear Actuator
This OpenBuilds C-Beam XL actuator is the backbone of a lot of the awesome builds put together by the OpenBuilds community
Build Author Mark Carew Views 13240
C-Beam XLarge X/Y Table
This OpenBuilds C-Beam XLarge X/Y Table is a great display of how easy it is to modify and create awesome configurations with the OpenBuilds system!
Build Author Mark Carew Views 10327
C-Beam® Double Wide Gantry Actuator
This easy to build actuator is configured to have not only strength, but accuracy! This low profile option offers endless possibilities, and we cant wait to see how this actuator is implemented in your build ideas!
Build Author Mark Carew Views 116933
C-Beam™ Linear Actuator
Here are a few helpful C-Beam actuator ideas that will help you get a start on your builds
Build Author tmadrms Views 5949
C-Beam Mods
C-beam machine mods.
A More Rigid C-Beam
I added the steel to create a less flexible milling surface to make heavier cuts in aluminum. I can also do light steel cutting now as well. I wish OpenBuilds made a steel and rail version of these kits.
CBeam Sphinx Upgrade
Simple upgrade of the Y axis on a Cbeam sphinx from 500mm to 1000mm.
Build Author MarkM_NJ Views 18522
Spartacus Inspire
My very first openbuilds cnc machine. Followed along DaztheGas's Spartacus build.
Build Author CharlieShimota Views 14234
Vox Solid State
I never thought owning a CNC machine was possible until I stumbled upon the Openbuilds site. After viewing numerous builds I was drawn to the Ox by Mark Carew but ultimately decided on a build of similar design, Halloumi by Savvas. It's a C-beam design driven by Nema 23 steppers with Acme lead screws. Like Savvas I will be fabricating temporary plates to get up and running then use the machine to mill the final plates. The material I'm using for the temp plates is solid surface (Avonite).
Build Author Christian James Views 7227
Workbee "style" 1010 cnc
This build is based on the Workbee 1010 CNC. It is not a kit build and is much the same as the original but with some significant changes made here and there as the build progresses.
Build Author patnap71 Views 5396
MEGADELTA, TLM CLONE with 500MM bed
All metal frame 500mm bed Delta 3D printer
Build Author Jay Almers Views 6245
FlashPoint CNC v1: 500mm x 1000mm 3-Axis CNC Router
My build is based on many different builds but pieced together into a unit specifically to suit my needs. The footprint, without motors, is around 500mm x 1000mm with a gantry height of around 250mm. I used a combination of C-Beam, for the linear transmission, and V-Slot for the base and gantry supports. Forged angle connectors were used for attachment and I utilized the C-Beam gantry cart kits with anti-backlash blocks for both Y axes, the X axis, and Z axis.
Brokkr CNC 2.0
1M C-beam xy variant
Build Author Michael.M Views 60502
GRANITE 1.0
This machine has been in the works for quite a while. Most of the plates were cut with my Shpinx machine. I have a lot more photos and information to share soon.
Build Author Troy Proffitt Views 23598
Sphinx Upgraded plates / ballscrews and linear rail
Upgraded Sphinx Cbeam using 3/8 aluminum plates and linear rails / ballscrews
John's Sphinx
1000mm x 750mm C-Beam Sphinx, running on Grbl
Build Author Vin1027 Views 6024
C-Beam Sphinx
This is the original C-Beam Sphinx with the 16 wheel X gantry plates. I'm using the Ethernet Smoothstepper, Gecko G540 stepper driver and Mach 4 for motion control.
Build Author James Evanko Views 2894
Sherline C-Beam with Offline Controller and MPG
This is a C-Beam based router with V-rails used for the bed, a Sherline spindle with Jacobs chuck, closed loop stepper motors on every axis and an offline 4-axis CNC controller. A U-channel was created to guide the drag chain on the X-axis.
Desktop CNC
This unit is made with openbuild v-rail and c-beam. using direct drive with lead screws. Nema23 motors
C-Beam Machine XLarge
A rigid and wide format, plate and carving CNC.
NotAnOx
From plywood and linear rail to c-beam. I probably should have bought a kit.
C-Beam unit with 400W Spindle
Standard (If there is one) C-Beam with plnth
Build Author Kyo Views 138055
C-beam Sphinx
A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..
Build Author ChrisViral Views 5636
OP C-Beam Machine XL by ChrisViral
Video diary C-Beam XL build with massive steppers and a 1.5kW Chinese spindle.
Build Author HuguesP Views 8116
YACLR CNC
Yet Another Chinese Linear Rail CNC, my first one, doing this mainly for the fun of building it more than using it.
C_Beam X5L Hybrid_Tank
classic router with a ab table
1200X600 SPHINX
Need cnc to make alumunium sign, brass stamp, etc
1075 Sphinx
My first attempt at building a CNC. I chose the Sphinx due to ease of build and extensive documentation provided by Kyo.
Spartacus
Been using the Ox now since 2015, so decided I should move on to C-Beam :-)
C-Beam Desktop On Rails
My attempt at a Desktop CNC using C-Beam and Open-Rail with Steel Wheel bearings and LeadScrew Drive.
C-Beam Machine XL
C-Beam XL upgraded with end-stops, E-stop, and cable chain. Running GRBL on Arduino Mega.
C-Beam Machine - MyFirstCNC
This is my first foray into CNC machines, after much review I decided on the C-Beam machine as it seemed easy to work with and will enabled me to build more and larger machines as I gain knowledge. I am planning on building the machine largely unmodified from the reference design. I will be building the machine an axis at a time as I need to spread out costs over time.
Build Author Limine3D Views 3306
Shapeoko 1 upgrades
Replaced the original Z-axis for a shapeoko with a c-beam upgrade. This upgrade required a nema 17 mount and a quiet spindle mount I printed with a 3D printer.
Build Author obmilllivebuild Views 4635
Live C-Beam Build @ MRRF2018
Contained within are links to our OpenBuilds sponsored C-beam Machine live build taking place at MRRF 2018 (Midwest Reprap Festival) on March 24 and 25, 2018. There will also be some build images and a few 3D printed STL items that were added.
Build Author Janis93 Views 13595
1000x1000 Two version of router Belt and Screw
Cheap sheet metal gantry solutions, for diy belt driven cnc and screw driven cnc.
Build Author OffAxis Views 6225
OffAxis CNC 1000x1500
Cut Area: 825 x 1340. Max Cutting depth: 2 inches. Arduino based control with Nema 23 and Nema 17 drive. 8mm leadscrew and 2GT belt drive. 400W 48V quite cut spindle.
Build Author crnrstndes Views 3062
C-Beam Upgrade to Larger C-Beam
My goal was to be able to enlarge my C-Beam with as many original parts as possible. I was able to recycle almost all of them with a only the two 500 mm rails left over. I used 1000 mm rails for the X Axis and I added another complete Y Axis assembly. I chose to keep it simple and I am very happy with the result!
Build Author Rob Mahan Views 11398
Rob's C-Beam Machine XLarge
This is my first CNC router build, so I started with the OpenBuilds C-Beam Machine XLarge mechanical bundle, including four high torque stepper motors. I took my time with the mechanical build, sought and found some great help for my control system, and designed and built a custom cabinet to house everything.
Build Author blterry1 Views 16270
The Beeline CNC
Here are the instructions to build the Beeline custom CNC router table.
Build Author spark2 Views 4302
C-Beam - Sphinx 1000x1000mm inspired by Kyo
A stable CNC Router that allows me to cut and carve bigger Parts. The Machine is an original Build from Kyo's Sphinx CNC Machine. Thanks for the great Work and the Effort Kyo. Your Files and Lists helped me a lot to build that Sphinx 1x1m.
C_Beam Hammerhead 5x
setup for learning 5x
Build Author Glenn Weston Views 16587
"The Moagie Mill" My C-Beam XLarge
My Experiences building the C-Beam X Large. Maybe you can pick up a few pointers from my ramblings and experiences if you are considering building this machine.
Dogmeat's Custom C-Beam XL
I love the C-Beam XL concept, this build is my custom version with the goal of increasing rigidity for metal milling.
Build Author Carl Siren Views 6167
CNC-machine 650by700
A home-made CNC-machine with a 1.5 kW air cooled spindle motor suitable for milling materials such as wood, plastic and soft metals. The work table is 650 mm wide by 700 mm deep and the maximum movement is set to 560 mm for the x-axis, 480 mm for the y-axis and 105 mm for the z-axis.
Build Author Carl van Heezik Views 7131
C-Beam™ Machine for PCB milling
C-Beam Machine for PCB milling
C Beam Served
C Beam Machine built in a server cab. Hopefully this keeps every thing enclosed , clean and quite ?
Build Author dmasters Views 7205
DM C-Beam XXL Tank
1000mm x 1000mm C-Beam XXL CNC with external drivers and high torque Nema 23 motors, 2.2KW Spindle with VFD.
Build Author Apothus Views 20802
Sphinx rigid XL
Rigid variant of the C-Beam sphinx platform
Build Author Terone Burgenheim Views 1996
My CNC
This build is my version of the CBeam machine. I opted to NOT use the Gussets, and instead went for the 40, and 60 mil angle brackets to cut the price back a little further. I started with the smoothieboard but decided it was still "too new" and very much experimental. This build took me a few (2-3) days to complete. The CBeams and Lead-Screws really make building things faster since you don't have to clamor over belts.
Build Author jamesdjadams Views 11101
C-Beam XL - TinyG - Aluminium Plate - Dewalt 611
C-Beam XL build using TinyG V8.
Openbuilds C-beam
This is a build supported by Ooznest by a team of girls in Year 8 (12/13 years old) to machine model F1 cars for the F1 in Schools competition.
Build Author Kyo Views 8432
Plate Maker V-slot Table
C-beam Plate Maker V-slot Table System to aid in clamping and setup of jobs.
C-Beam XL ( 1 meter²)
A modified C-Beam Build with a few Addons
Build Author Anthony Castelluci Views 2466
Simple Camera Lofted Camera Slider
Build a manual camera slider.
SkyKae sphinx - c beam xl hybrid
I took what I thought were the best parts of the sphinx and the c beam xl to build a bigger and faster machine.
Build Author beardyblair Views 24028
Sphinx XL
My build log of an adapted Sphinx design with additional height and a larger X and Y axis.
C beam machine (with larger T-slot platform)
Larger, more rigid build plate C beam machine
Heavy duty C Beam
a 1000mm x 1500mm CBeam build with hgr20 hiwin rails 600w er16 spindle
C-Beam Elexa
This build will be based on the C-Beam Plate Maker, with additional changes based on other builds and ideas.
C beam Larger and Stronger
My first build based on the original C beam Sphinx. I’m not sure at this point what the final size will be. I have the parts from the c beam Sphinx and extra beams and lead screws to build up to 1000mm x 1000mm.
Build Author Savvas Views 18036
C-Beam Lead Screw CNC Mountain
I’m making a desktop CNC machine based on the C-Beam platform. It will be driven by Tr8 Lead Screws, and initially made from 12mm birch ply plates.
Build Author Andrew Helsel Views 10882
MiniMill Smoothie
MiniMill with DW611 and SmoothieBoard 4x v1.1
Build Author Greg Lampman Views 8067
C-Beam Intro to CNC
Build log for my first CNC machine, a C-Beam Plate Maker
Build Author Huub65 Views 7404
My C Beam - NEMA 17 - GRBL- Arduino project
Cbeam machine. Using small stepper motors (NEMA 17) and Arduino controller. Try to get this working in de upcoming month.
C Beam CNC+Laser
You will be following the assembly of the mechanical kit and how i integrate the electronics into the final build.
C beam xl
I would recommend this challenge to any woodworker looking for something new.
Salmon Sphinx 1.0
A tribute build based on Kyo's wonderful CBeam Sphinx. My hope is to improve on that build slightly, but to be honest, I'll probably just screw it up. I'll use this build to publicly document my failures.
Another Sphinx - 1000mm x 750mm
The reason for building this CNC is to help me in my guitar building hobby. (telecasters)
BD's C-Beam Machine CNC Router (WIP)
CNC router table based on OpenBuilds C-Beam Machine bundle.
Build Author Sonny Lowe Views 5883
The MakerSL Customized OB Minimill
This is my interpretation of the OB Minimill, what I've changed so far, and what may continue to change as my requirements change.
CNC Planning
Reusing parts to build a CNC - planning stage
Dixie C-Beam XL
Build log of the Dixie C-Beam XL CNC Router.