Build List
-
Active Filters:
v
Kool Bot
Mid range build.
Build Author Kyo Views 8443
Plate Maker V-slot Table
C-beam Plate Maker V-slot Table System to aid in clamping and setup of jobs.
Build Author Mike Andrews Views 8378
Monster - a multiple material 3D printer with 20"(X) X 14"(Y) X ~20"(Z)
A Laut3k derivative that goes for volume and large number of print materials at the same time. Using OpenBuild linear motion systems to get away from belt drives.
Build Author David Florian Views 8349
Dual Extruders 3D Printer - Zidex Upgraded
How to build an Independent Dual EXtruder (IDEX) 3D printer from OpenBuilds parts.
Build Author Keith Davis Views 8338
Upgrading Your 3D Printer With Synchronous Leveling
Upgrading printers for Synchronous Leveling
Live D-bot build at MRRF 2017 (Mar 25-26)
I will be attending the 2017 Midwest RepRap Festival (MRRF) with a small team of printer enthusiasts with a goal to fully assemble a Core-XY D-bot onsite during the event. This is our first attempt at building a D-bot and we will be learning things as we go. Our hope is to have the entire machine assembled, wired, and functional (at least to the setup and testing phase) before the end of the show. Please attend and watch us in person or visit our feed channel during/after the event.
Build Author openhardwarecoza Views 8287
3D Printer 320x220x200
Someone donated a E3D Volcano to me (http://e3d-online.com/Volcano/V6-VOLCANO-POWER-PACK-175-UNIVERSAL-24V) and with a super hotend like that, it feels like a waste to stick it into a small 3D printer. So I decided I want a 320x220mm (XY) machine, 200mm Z is plenty for me
Fun and Functional Laser Build
A very fun and fulfilling build. I can't say enough about the whole Open Builds site and Open Source movement. I strongly believe this is the fastest and most creative way of getting ideas out of the mind, and onto the floor.
Ike:Laser
A 2 axis laser engraving machine, with a manual Z axis.
Build Author Anglesachse Views 8097
Zorkbot
Corexy, with possible head change (3d, cnc, laser)
Build Author Mark Carew Views 8081
Work Bench Stand
Here is a nice little simple build that will help to free up some extra space on your work bench. If your like me you need all the room on your work station you can use, so this is great to have.
Build Author griso Views 8060
3d nika
Over 840 parts. Of whom around 450 are screws and nuts, more than 100 parts are printed on a 3D printer, the frame consists of about 60 components. There is nearly 40 electrical components connected with tens of meters of wires, most of them sleeved.
CORE XY 3D Printer
This is an inexpensive build, large volume 2225 cubic inch, CORE XY 3D printer providing decent speed with precise and repeatable precision with expandable features.
Build Author Nicademus Views 7992
CNC/3DPrint/Laser/Mill (formerly CNC-inator3000)
Ultimately - the design is based on the highly successful Ultimaker concept, for which a regular size costs in the thousands, and one of this size would be edging into the 10's of thousands. Expected Build cost - <$800 It is a X/Y Cartesian printer with Raising/Lowering Z axis (Hotbed.) - Overall size is 610mm x 610mm x 750mm - with build volume of around 450mmx450mmx450mm - and will also have the ability to change work tools - such as for CNC Routing, Lazer etching, 3d Scanning, etc.
Build Author Rwetzler Views 7945
C-Beam Prototype
This is a variant of a typical OX (Mark Carew inspiration) router using C-Beams/8mm Acme rods to drive all three axis. I went with a 1000mm x 1000mm frame size. Useable space is 28" (711mm) X 26" (660mm) with a Z axis work travel of approx. 3.25" (82.5mm). A TinyG is used as a controller along with Fusion 360/Chilipper as the software for generating and running gcode files.
Spindle cooling setup
Cooling system for water cooled spindle.
Build Author M1dn1ghtN1nj4 Views 7893
The Beast
This is a heavily modified system based on the RatRig V-Cast. Lots of personal touches, and a LOT more to come!
Build Author Richard Bugland Views 7887
Heavy Inexpensive CNC
Acquiring a CNC has been on my list for some time now. This concept is a bare bones, upgradeable machine that will not require a complete rebuild when new parts become available. With a cutting surface over 36" square, this beast should be capable of creating its own parts. Lowering the price to make upgrading and making this contraption beefier, faster, and more precise.
core xy smoothie
i had som left over parts and i dit like to test the corexy control so this is wat i came up with. sorry bad englich.
Build Author Gooshpoo Views 7856
Gooshpoo's H style cnc machine
A cool project about my cnc machines unique style.
Large 3D printer 12"x12"x12" with heated bed
I want to have a printer to support senior projects. Also working on supporting 3D printing needs in the local community.
Build Author Marco964 Views 7735
Lead CNC 1510 modified
This is an Openbuilds LEAD 1510, modified to supports a liquid cooled 1.5Kw spindle. The movements are made with lead screw on all three axes.
Build Author Colin Russon Views 7712
RoboFoamCutter
Lead screw based Foam Cutter that can easily be adapted to full belt / pinion drive and to CNC.
Build Author DiggerJ Views 7674
Babe - The Big Blue (Laser) OX Build
A 1000 x 1500 OX build with the ability to router cut dovetails as well as laser engraving and light cutting.
Build Author CWidt Views 7663
OpenBuilds CAndC - CNC Machine
A new derivative of the famous OX CNC, with increases strength, rigidity, and accuracy.
Build Author zann68 Views 7652
OX CNC 4'x4'
Out with the Old in with the New. Trying to build a nice clean setup that myself and my sons can use and enjoy.
Build Author Pol Feliu Views 7651
Batxillerat Research Project: Design and construction of a CNC
I'm working on a cartesian cnc router for my school research project
Build Author Karan Singh Sisodia Views 7618
CNC Laser
CoreXY based CNC Laser machine.
Build Author Bridge Port Views 7607
CNC Line Boring Machine
This is a CNC Line Boring Machine for our cabinet shop. It drills the holes every 32 mm for the adjustable shelf pins in the cabinet side pieces. I chose this option over purchasing a multi-head boring machine that requires 11 drill bits - Left & Right hand twist - that also requires a lot of strength to plunge that many drill bits into the wood to be drilled.
Build Author Tucstrlly Views 7525
Stainless OX Kit Build "Diamondback CNC"
A copy of the Stainless Ox by Martin Barfoed. Similar design, construction and control.
Build Author Limine3D Views 7519
M3D Squared
A cartesian build with a build dimension of 200x200x750mm. I will be using a dual extruder, heated build plate, and a screw drive for the z axis.
Build Author Justin Butler Views 7477
My Belt & Pinion Drive CNC Router
My CNC Router design and inspiration came from the Routy CNC project. I modified some of the aspects of the Routy build, but left the original XY dimensions intact. The build has been very enjoyable thus far and am nearing completion of all wiring in preparation for my first test run!
Horizontal Cantilever or Vertical Diode Laser Engraver
Light weight portable Laser Engraver (6.5lbs - 12lbs)
Build Author richthorn Views 7462
Aluminum Ox
I have been looking for a good solid kit to build off of for some time and when I saw the Ox buildlog I knew I had to have one. Ordered most of the pieces from Open Builds and started planning. Had a nice gentleman named Chris cut the required plates from 6061 aluminum for me (he sells them on eBay now if you're interested) and got to work.
HAPP Printer
This 3D Printer is made to provide the most accurate results with the least amount of investment. This Printer is being designed to allow the common user to own a very accurate piece of machinery.
C-Beam Big Mouth
My first build was with the basic C-Beam Build. I soon found the z clearance a little constricting So I added 2 500 mm actuators to support the x axis rail . I also left off the front and back y axis support rails for easy cleaning. I mounted the base of the machine to 1/2" mdf with 10/32 screws and blind nuts.
Build Author recoush Views 7453
CoreXY 3D build one
an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool
Build Author boutrous Views 7404
Laser Rotary Attachment
Build Summary updated after parts list completed
Build Author mikev Views 7402
C-Beam Evolution MkII
The C-Beam Evolution is an evolving machine. The MkII is inspired by Kyo's C-Beam Spinx but currently uses my own design of plates made of 8mm acrylic (X-axis ends) and 6mm polycarbonate (Y axis ends). The plates were made on the MkI but I hope to be able to make 6mm aluminium plates on the MkII for the MkIII.
Build Author John J Talavera Views 7374
CNC FOR EVERYONE, THE DUCK!
www.cncforeveryone.com. the Duck is something that i think would be helpful in my shop since we already do cold casting.
Build Author Neptunes Guitars Views 7343
Neptunes Ox
First build of CNC OX for the purpose of using it for Guitar building to take a lot of the muscle work out so I can concentrate on the finer details.
Build Author Kenneth Witthuhn Views 7283
Openbuilds CNC (witthuhnCNC XKLBR-1S)
Based on the popular C-beam / V-wheel design, with the largest available work area, relative to machine size. Screw driven with anti-backlash, integrated drag chains, Carbon fibre gantry plates, Openbuilds BlackBox Controller (USB), Transformer & kill switches, with internal wiring, limit switches & Nema 23 motors.
Build Author Krishnakumar Views 7251
Hobby OX CNC
This "hobby OX" CNC is built for multiple purposes such as cutting and engraving various materials, laser etching and cutting, etc... Its a great platform for hobby enthusiasts like me where this machine can be used for so many different purposes effectively and efficiently!
Build Author Christian James Views 7251
Workbee "style" 1010 cnc
This build is based on the Workbee 1010 CNC. It is not a kit build and is much the same as the original but with some significant changes made here and there as the build progresses.
Build Author Tinker Views 7247
Kitchen Space Saver
The frame is made from all open builds parts, add the rubber feet and pads for the glass. The glass is clear 12" x 16" x 1/4" with a polished edge. A light basket slides on the countertop.
MMXL - A MiniMill Conversion
Using most of the parts of the MiniMill, and adding a few other parts (cost < $200), transforms the MiniMill into a very capable machine. Final build area as shown is 10.25" x 16". With a custom Y-plate, I will take it to 10.25" x 20-24".
Dedicated Compact Rotary Axis Laser Engraver
Compact Dedicated Rotary Axis Laser Engraver
DPR-v2 full metal
pictures and mony doku see later
Build Author CreativeTools Views 6892
Universal stand-alone filament spool holder (Fully 3D-printable)
A practical rotating and stand-alone spool holder which fits any filament extrusion 3D-printer. Several base files provided which make it fit different extruded aluminium profiles.
Build Author John J Talavera Views 6786
Rotomolder
A simple low cost rotomolder.
Build Author taratata2016 Views 6767
Panther 3D printer
After use of the i3 Prusa 200x200x180, the volume increases to 300x300x450 on the V-Slot and driven by a Megatronics V3
Rotary Axis for Laser Engraver/Cutter
This is a fully adjustable, low profile rotary axis for your Laser Cutter. Many OpenBuilds components are used, plus a handful of 3D printed parts.
Add more V-Slot to my Makerfarm 10" Prusa i3v
Upgrade my 5 year old Makerfarm printer to use more V-Slot
Build Author pedrofernandez Views 6558
ACRO 20x20
The Acro Laser Machine Build
Build Author Mark Carew Views 6511
OpenBuilds PowerCase
A simple to assemble, super clean and safe PSU case solution that fits into the OpenBuilds wire management ecosystem
Rigidbot Big with glass bed
Started with a Rigidbot Big Added a single flat glass bed Used a Smoothieboard clone driving DRV8825
Build Author holographic Views 6450
Laser DIY
How i construct and create my DIY Co2 Laser cutter and engraving mashine. details will follow
Build Author lekey Views 6418
Modular Desktop Vacuum Former
This is a small desktop vacuum former that can be connected to a shop-vac and an electric heat source (like a grill for instance). You can control the time each appliance stays turned on, and the vacuum is automatically turned on when the tray is placed on top of the model. The vacuum table is 20x20cm wide, and I've tested it mostly with 1mm thick PET sheets.
Build Author MrMojoRisin Views 6318
IIOT WiFi Portable CNC Plasma Cutter
IIOT WiFi Plasma CNC.
Build Author evgeny156 Views 6313
3D Printer on Prusa architecture with best parts available
Wanna quet an nice looking device done by my hands
XDrive 3d Printer
XDrive 3d printer, high quality large build volume.
Strong? CNC
The goal is to have a relatively strong CNC to be able to cut alu. Working space will be around 800x350x100mm.
Build Author Jay Almers Views 6271
FlashPoint CNC v1: 500mm x 1000mm 3-Axis CNC Router
My build is based on many different builds but pieced together into a unit specifically to suit my needs. The footprint, without motors, is around 500mm x 1000mm with a gantry height of around 250mm. I used a combination of C-Beam, for the linear transmission, and V-Slot for the base and gantry supports. Forged angle connectors were used for attachment and I utilized the C-Beam gantry cart kits with anti-backlash blocks for both Y axes, the X axis, and Z axis.
Build Author Bob Darrow Views 6211
BA3DP
A slightly more than one half cubic meter 3D Printer using V Rails, V Rollers, "C" Rail, mounting plates, and a bunch of 3D printed brackets to provide strength and stability to the frame. Rigidity was the goal and precision and accuracy the result. The software is a whole other topic, many weeks spent dialing that in to make the printer print.
Build Author Carl Siren Views 6202
CNC-machine 650by700
A home-made CNC-machine with a 1.5 kW air cooled spindle motor suitable for milling materials such as wood, plastic and soft metals. The work table is 650 mm wide by 700 mm deep and the maximum movement is set to 560 mm for the x-axis, 480 mm for the y-axis and 105 mm for the z-axis.
Build Author Jonathon Duerig Views 6165
Chrysalis: An Enclosure for TAZ 6 3d Printers
Aluminum-framed enclosure for TAZ 6 3d Printer made with Makerlink.
The BEE and ME
I have always wanted to work with CNC machinery...a few years back I got my chance to learn some basics at the Double Glazing Company where I was employed (very basic I might add) before the firm folded and I was made redundant...I wanted to continue learning and when I came across this site which push affordable machines I thought I'd give it a go. So I purchased a !000mmx750mm Screw Driven Workbee from Ooznest and I'm about to embark on my quest as many have done before me...Wish me Luck!
C-Beam Sphinx Vacuum
A modified 1000x1000 Sphinx, with a built in vaccum table.
Build Author Sonny Lowe Views 5922
The MakerSL Customized OB Minimill
This is my interpretation of the OB Minimill, what I've changed so far, and what may continue to change as my requirements change.
Sim Racing rig
Made with OpenBuilds 2020 and 2060 material/brackets/hardware. Simlabs wheel deck. Fanatec DD wheel base/wheel/pedals NRG seat Sim racing studio wind simulators Few 3D printed brackets/caps/cable holds
C-Beam XL with Aluminum Bed
C-Beam XL with v-slot aluminum bed for fixturing.
Build Author Bruce Walker Views 5770
BD's Burn Box - ACRO Laser Engraver System
Two plus years in the making, I finally have a working ACRO 510 laser engraver system complete with enclosure and air filtration.
V-Slot Linear Actuator Bundle
v-slot linear actuator build.
Build Author ChrisViral Views 5680
OP C-Beam Machine XL by ChrisViral
Video diary C-Beam XL build with massive steppers and a 1.5kW Chinese spindle.
Build Author DIY3DTech.com Views 5678
3D Printer Leveler Made with Maker Rail
Leveling Platform / Stand 3D Printers
Build Author Vunnie Views 5678
Workbee CNC on steroids
My First major improvement was changing the controller to a Acorn board. I loved the way a dedicated userinterface was speeding up my workflow. Next project my Y Axis. On Aliexpress I ordered a couple of 16mm ballscrews and some lineair rail. Before I took my gantry off I quickly made some aluminium profiles to fit my carriages. Withouth any doubt these improvements where worth it
YAWBM - Yet another Workbee Modification
Increase Z axis travel by 20-25mm with minimal modifications
Build Author mytechno3d Views 5640
DSLR ( video ) motorized slider
In order to make some nice traveling video you need a slider .
Build Author Quentin Karmark Views 5595
Laguna Swift 4X4 CNC mill retrofitted with OpenBuilds
Used Laguna Swift 4X4 CNC mill with Water-cooled Spindle and RichAuto serial pendant retrofitted with OpenBuilds/Blackbox/Interface
OB Lead 1515 CNC Router 2021
Building the OB Lead 1515 was straight forward. The on-line OpenBuilds assembly videos were extremely clear and easy to follow. Initial build of this machine is with OpenBuilds BlackBox which simplified getting the electronics to work the first time. OpenBuilds staff are friendly and helpful.
Eddie's Build of Niko's (gianakop) Egg Painter
This is my build of Niko's (gianakop) Egg Painter. Egg decorating is something many Christians do for Easter Sunday and the Easter (Paschal) Season that follows. This will be my initial use for the build, but also with minimal modification to be able to write/paint on other round objects like Christmas ornaments, coffee mugs, etc. Many people also decorate eggs for purely secular reasons.
Build Author dodgenet Views 5467
Budget 1500mm OpenBuilds V-Slot Deltabot Build
This 1500mm tall Delta is a work in progress. The triangle corners are water jetted from 1" 6061 Aluminum, and are welded to 1" square tubing. The 1500mm OpenBuilds 20x20 V-Slot extrusions are held into the corner brackets by two stainless steel set screws per bracket. This printer will need to be reinforced with wall brackets due to the combination of height/materials.
Build Author patnap71 Views 5451
MEGADELTA, TLM CLONE with 500MM bed
All metal frame 500mm bed Delta 3D printer
Build Author OpenBuilds Views 5367
V-Slot Ventilator
The idea is to make a simple effective ventilator, studying the concept of using a simple push process with and actuator.
Build Author thehans Views 5357
Voxel OX with Helix Gear Z Transmission (single z motor)
This is a modification I made to my Voxel Ox 3D Printer Z axis, which synchronizes the Z leadscrews via a shaft and helical gear transmission. It prevents the two Z leadscrew from getting out of adjustment relative to each other, and uses a single Z motor instead of two. This build is just documenting the specific changes I have made to the Z-axis, since the frame and other axes are still from the original Voxel Ox design.
Workbee 1000x1000 mm screw driven Full Kit From Ooznest
A short summary of my Workbee CNC Build. I try to update it where I can
The MULE (an OX inspired 3-axis CNC)
The Mule is a 3-axis CNC inspired by the OX CNC by Mark Carew. This machine borrows the OX's sturdy frame and upgrades the X and Y linear actuators through the use of three 500mm lead screws (as opposed to the belt system of the OX). The result is an inexpensive, sturdy, and powerful design built for cutting tough materials such as aluminum.
Build Author Sonny Lowe Views 5196
MakerSL MSL-65 Manual Coffee Grinder Stand
I know this build is a little off category here at OB, but I wanted to share it with the community (as well as other coffee lovers) and show however vast the possibilities are when OB hardware is involved. This is a powered stand intended to operate a manual coffee grinder. It is compact, light, portable and uses simple drive components (B&D Cordless Screwdriver). I will post two version, V-1 (Beginner skill level ) and V-2 (Intermediate skill level). Both accomplish the same results.
Build Author cbordeleau Views 5169
Slider Levelling Platform
3d printed V-Slot Gantry Plate leveler.
Simpl3rBot
A framing design for cantilever style printers
Build Author msdosfx Views 5037
Workbee 1510 Screw Driven
Workbee 1510 screw driven build by MsDosFX.
Build Author inhan Views 5034
openbuilds rovo 1000mmx1000mm(rovo x)(korea)
Open build rovo 1000mm * 1000mm. (Rovo x ver) 20.06.2015 now in progress. rovo kit is the 10th product. 8th rovo 750,9 th rovo1000, 10th rovo x ver progress at the same time. 10th item is an aspect of 1000. It changes the size and z-axis has been up.
Build Author pek Views 5012
V-Slot Hand Cutting Jig
To help cutting v-slots with hand saw
V-Slot 2020 EggBot
To build a simple EggBot
Build Author Sonny Lowe Views 4948
MakerSL MSL-7 Laser Cut Tape Dispenser
An easy simple Tape Dispenser, spawned out of necessity, and shared for the fun of it...
Build Author TurfnSurf Views 4948
3-Axis Plywood CNC
Theoretical Working area: 38" x 24" x 6" Actual Working Area: 31" x 23.6" x 4" Positioning Accuracy: about 0.01mm
Build Author Martin.Barfoed Views 4946
40x40 V-Slot Rod Type Linear Actuator
A Rod-type Linear Actuator based on the 40x40 V-slot profile
MiniMill build
A table top OpenBuilds MiniMill build. 48V 52mm spindle with ER11 collets.
Build Author Steve Marsh Views 4835
Dust Shoe for Colt router and OxCarve
A simple 3D printed dust shoe for the cnc router. 2 parts held together with magnets for easy bit changes.
Build Author JerwanDavis Views 4818
Coined by my family as the: Davomatic
Build Notes: Here are all the parts necessary to re-produce this design. Please note, all of the parts are either sourced through openbuilds or have been selected and printed from thingiverse.