Build List
-
Active Filters:
o
![DIY Embroidery Machine V2](https://openbuilds.com/data/article_images/l/8/8630.jpg?t=1560204694)
Build Author
sausagePaws
Views
1741903
DIY Embroidery Machine V2
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
My second attempt at an affordable sewing machine embroidery add on. This one uses readily available electronics modules and 3D printable parts where possible.
![OpenBuilds OX CNC Machine](https://openbuilds.com/data/article_images/l/0/341.jpg?t=1391561605)
Build Author
Mark Carew
Views
1158804
OpenBuilds OX CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!
![C-Bot](https://openbuilds.com/data/article_images/l/1/1146.jpg?t=1456323895)
Build Author
Carl Feniak
Views
278038
C-Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy.
![C-Beam® Machine - Plate Maker](https://openbuilds.com/data/article_images/l/2/2020.jpg?t=1529678249)
Build Author
Mark Carew
Views
252883
C-Beam® Machine - Plate Maker
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
This C-beam Machine is an in affordable CNC plate maker and 3D carving machine!
![OpenBuilds ACRO System](https://openbuilds.com/data/article_images/l/5/5416.jpg?t=1529678125)
Build Author
Mark Carew
Views
206970
OpenBuilds ACRO System
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/318.jpg?t=1529427874)
The OpenBuilds ACRO System was developed to be the most accurate and cost effective positioning system in its class. The ACRO System incorporates the OpenBuilds V-Slot system and, therefore, has the unique ability to expand to multiple sizes creating a size configuration custom to your needs. Choose the size that best fits your workshop. This versatile system allows for precise positioning of many different mountable tools and attachments.
![LEAD CNC 1010 (40](https://openbuilds.com/data/article_images/l/7/7832.jpg?t=1543351749)
Build Author
Mark Carew
Views
179372
LEAD CNC 1010 (40" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds Lead Machine takes us back to the roots of the OpenBuilds modular building system, and has proven itself as an adaptable design that can compete with any machine in its class!
![OX-Metal CNC Router Mill](https://openbuilds.com/data/article_images/l/3/3681.jpg?t=1467782548)
Build Author
Schematix
Views
152110
OX-Metal CNC Router Mill
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The OX-Metal is based on the original OX CNC mill But with a few modifications and add-ons
![Laser V](https://openbuilds.com/data/article_images/l/0/226.jpg?t=1389473225)
Build Author
Robert Hummel
Views
149369
Laser V
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
With such great success/attention my laser got, I ended up with a good friend that would like to dabble in stencil art and so I have decided to share my build with him and you here :) I will be using all the same electronics as in my previous build except the driver boards I will be using are the famous reprap 4988's they are more easy to come by and cost less. I will also be using open builds mini v wheels/v groove extrusion just so I can get a feel for their versatile products
![OpenBuilds MiniMill](https://openbuilds.com/data/article_images/l/5/5087.jpg?t=1543859341)
Build Author
Mark Carew
Views
140560
OpenBuilds MiniMill
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
This OpenBuilds Mini Mill is a great go-to desktop sized CNC milling plate / part maker and 3D carving machine!
![C-beam Sphinx](https://openbuilds.com/data/article_images/l/3/3605.jpg?t=1471145528)
Build Author
Kyo
Views
138351
C-beam Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..
![Ooznest OX CNC Machine](https://openbuilds.com/data/article_images/l/2/2084.jpg?t=1468952479)
Build Author
Ryan Lock
Views
129286
Ooznest OX CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.
![WorkBee CNC Machine](https://openbuilds.com/data/article_images/l/5/5626.jpg?t=1505419208)
Build Author
Ryan Lock
Views
123599
WorkBee CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The WorkBee is our latest CNC Machine and is a culmination of all our experience, feedback, and suggestions from selling the OX CNC Machine over the past 2 years. The WorkBee is capable of accurately cutting foams, woods, plastics or aluminum at depths greater than 25mm to 0.2mm accuracy or greater.
![V-Slot® NEMA 17 Linear Actuator (Belt Driven)](https://openbuilds.com/data/article_images/l/0/80.jpg?t=1444071466)
Build Author
Mark Carew
Views
119462
V-Slot® NEMA 17 Linear Actuator (Belt Driven)
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
Quick and Simple V-Slot Gantry System. This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts. You can mount this system an many ways so be sure to download the example models.
![C-Beam™ Linear Actuator](https://openbuilds.com/data/article_images/l/1/1955.jpg?t=1443543394)
Build Author
Mark Carew
Views
117355
C-Beam™ Linear Actuator
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
Here are a few helpful C-Beam actuator ideas that will help you get a start on your builds
ROUTY CNC Router (V-Slot Belt & Pinion)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A cool little CNC router build that uses the V-Slot belt & pinion drive and stock parts.
![Indie i2](https://openbuilds.com/data/article_images/l/1/1976.jpg?t=1467535954)
Build Author
Indieflow
Views
109783
Indie i2
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A lightweight, portable, accurate 3D Printer that has a good sized print area and small overall footprint that is easy to build, with easy to source components. The design is OpenSource allowing those with the capability to make their own parts get up and running.
![V-Slot® NEMA 17 Linear Actuator Bundle (Lead Screw)](https://openbuilds.com/data/article_images/l/0/634.jpg?t=1396042506)
Build Author
Mark Carew
Views
102215
V-Slot® NEMA 17 Linear Actuator Bundle (Lead Screw)
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
Example model of lead screw driven actuators for your next project!
The Frog: CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Frog CNC Router. Inspired by OX and "Routy". 24"x36" active working area, approx. 3" usable Z motion.
Area 51 CNC Parts F-117 CNC Gear Rack Drive System
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is my journey on building a rack and pinion Ox variant called the F-117 CNC.
![V-Slot™ Mini V Linear Actuator](https://openbuilds.com/data/article_images/l/0/48.jpg?t=1444073092)
Build Author
Mark Carew
Views
87957
V-Slot™ Mini V Linear Actuator
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
Learn to build the V-SLOT Mini V Modular linear Actuator System and create all kinds of cool machines!
![V-Slot™ Belt & Pinion Example Build](https://openbuilds.com/data/article_images/l/0/97.jpg?t=1389473395)
Build Author
Mark Carew
Views
80397
V-Slot™ Belt & Pinion Example Build
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The OpenBuilds team has redefined the belt and pinion concept. By using standard OpenBuild components were able to improve on this system in ways that will save on cost and enhance its engineering capabilities.
![Voxel OX - Extendable 3D Printer and CNC Platform](https://openbuilds.com/data/article_images/l/5/5080.jpg?t=1489276945)
Build Author
Marshall Peck
Views
78862
Voxel OX - Extendable 3D Printer and CNC Platform
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
An open source 3D printer design with a sturdy V-Slot frame
Much4 - LaserV printed version
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
By following the way of Robert Hummel, I drew a version of its exellent Laser V to use NEMA17 and easily printable parts.
![Prusa i3 Bear Upgrade V2](https://openbuilds.com/data/article_images/l/6/6428.jpg?t=1519671067)
Build Author
pek
Views
77270
Prusa i3 Bear Upgrade V2
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Stronger frame for Prusa i3 MK2(s), MK2.5 and MK3 3D printer
![OpenBuilds Workbee 1510 (60](https://openbuilds.com/data/article_images/l/7/7189.jpg?t=1529014366)
Build Author
Mark Carew
Views
76727
OpenBuilds Workbee 1510 (60" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds WorkBee 1510 - 1500x1000 Belt Driven CNC Machine
OpenBuilds LEAD CNC Machine 1515 (60" x 60")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
It began with creating an extremely rigid axis that incorporates a multi C-Beam Linear Rail system as well as precision lead screws coupled with a tension system for the absolute maximum in performance.
![BlackBox Motion Control System](https://openbuilds.com/data/article_images/l/8/8320.jpg?t=1568566381)
Build Author
Mark Carew
Views
73897
BlackBox Motion Control System
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The Openbuilds BlackBox is a new system evolved around a set of subsystems that cover more than just control and also more than just CNC type applications! With a plug-and-play easy connection system this controller can be used with ease, without sacrificing power.
![Embroidery machine with XY belt and pinion drive.](https://openbuilds.com/data/article_images/l/0/691.jpg?t=1398202839)
Build Author
sausagePaws
Views
72780
Embroidery machine with XY belt and pinion drive.
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A simple Embroidery machine using an XY belt and pinion drive to drive a hoop under a standard sewing machine. Needle timing, machine power and stepper control are all provided by a PIC processor. A tablet provides the higher level formatting required for communicating with the PIC chip.
![CNC xPRO Driver](https://openbuilds.com/data/article_images/l/0/643.jpg?t=1479952413)
Build Author
Spark Concepts
Views
71613
CNC xPRO Driver
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Spark Concepts CNC xPRO Driver. A new GRBL compatible, all-in-one stepper driver board with 4 motor controllers for XYZ + 1 clone (or rotary!). Capable of powering your next build with an ATX PSU (or 12V 2 wire supply), and ready for wireless printing. Compatible with Arduino (wireless robots anyone?)
![openBuilds FreeBURN-1 V-slot CO2 Laser (60-100w)](https://openbuilds.com/data/article_images/l/1/1001.jpg?t=1408972700)
Build Author
openhardwarecoza
Views
71399
openBuilds FreeBURN-1 V-slot CO2 Laser (60-100w)
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
DIY Lasercutter: Budget orientated, medium sized (60-100w), safety first, based on Lasersaur software toolchain
![Original PhlatPrinter](https://openbuilds.com/data/article_images/l/0/95.jpg?t=1389473544)
Build Author
Mark Carew
Views
70964
Original PhlatPrinter
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Phlatprinter foam cutting CNC machines are awesome space saving mills that use a rotary axis as a sheet feed.
![WorkBee CNC build - My honest opinion, tips and help](https://openbuilds.com/data/article_images/l/6/6407.jpg?t=1533433899)
Build Author
T4Concepts
Views
70804
WorkBee CNC build - My honest opinion, tips and help
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My main goal for my build is to have a machine that is capable of profiling and help me in my designs, for the manufacture of custom automotive headlights.
Delta-Six
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Super rigid Delta printer, using 20X40 V-Slot
![890KV OX RC spindle](https://openbuilds.com/data/article_images/l/0/411.jpg?t=1399994797)
Build Author
Robert Hummel
Views
68709
890KV OX RC spindle
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
This build is intended as a light alternative to the Dremel rotary tool.
![OpenBuilds Workbee 1010 (40](https://openbuilds.com/data/article_images/l/7/7198.jpg?t=1529023423)
Build Author
Mark Carew
Views
68555
OpenBuilds Workbee 1010 (40" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds WorkBee 1010 - 1000x1000 Lead Screw Driven CNC Machine
TITANXY (Fixed Build Plate, Quad Z Screw, CoreXY)
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Super Rigid CoreXY 3D Printer
![X Y Table OpenRail / V-Slot Build Examples](https://openbuilds.com/data/article_images/l/0/62.jpg?t=1389473342)
Build Author
Mark Carew
Views
67328
X Y Table OpenRail / V-Slot Build Examples
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
The X/Y table system is a great starting point for many CNC projects giving you the ability to move an object on the X and Y axis in a simple compact style.
![Maximus 3D Printer](https://openbuilds.com/data/article_images/l/0/952.jpg?t=1406983407)
Build Author
mytechno3d
Views
63911
Maximus 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A full scalable 3D Printer , with a big printing area. Build with openbuild parts from www.vslot-europe.com
![GRANITE 1.0](https://openbuilds.com/data/article_images/l/7/7661.jpg?t=1545775857)
Build Author
Michael.M
Views
60813
GRANITE 1.0
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This machine has been in the works for quite a while. Most of the plates were cut with my Shpinx machine. I have a lot more photos and information to share soon.
![myOX : a 4' x 2' OX CNC with potential](https://openbuilds.com/data/article_images/l/0/915.jpg?t=1458009996)
Build Author
Serge E.
Views
58912
myOX : a 4' x 2' OX CNC with potential
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is the story of me building myOX - my version of the "ideal" OX. I want a machine which can route/mill at least 4' wide and as long as I can feed through (don't be shy, think "infinity") as well as going deep on multiple faces - manual 4th axis. I have loads of ideas to take myOX towards that goal and way beyond. Time will tell. Just follow along through this build and possibly a few others along the way ... Check out my OXCalculator : let your computer figure out your BoM
![GridBot Two: Powerfully Simple](https://openbuilds.com/data/article_images/l/9/9144.jpg?t=1580061310)
Build Author
SOA
Views
57869
GridBot Two: Powerfully Simple
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Core XY, sensor-less homing, integrated camera, touch screen, pi, 32-bit controller, fast, quiet, beautiful prints. 300 x 300 x any build volume. Just change out the Z lead screws, rods, and four pillars. Total BOM around $700 USD. Build time around 6 hours.
![V-Slot NEMA 23 Linear Actuator (Lead Screw)](https://openbuilds.com/data/article_images/l/1/1393.jpg?t=1443541996)
Build Author
Mark Carew
Views
57585
V-Slot NEMA 23 Linear Actuator (Lead Screw)
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/317.jpg?t=1529427864)
Learn to build a super strong nema 23 lead driven linear actuator
CO2 laser.
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
Here it is my intention to show what was involved in adding a CO2 laser to my existing CNC machine.
![FARM OX (Four Axis Rotary Machine)](https://openbuilds.com/data/article_images/l/2/2415.jpg?t=1438353710)
Build Author
ymilord
Views
54875
FARM OX (Four Axis Rotary Machine)
![](https://openbuilds.com/data/article_cat_images/s/0/297.jpg?t=1376658449)
Four Axis Rotary Machine (FARM) OX. Equipped with a X,Z,A & C Axis.
ACME OX (A Lead Screw Driven Ox Derivative (850x1500))
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Another build based on the original OX design with a cutting area will be about 26" (680mm) x 50" (1300mm) and driven by lead screws.
OX AI
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This will be an Aluminum OX build. Plates and all design credit goes to Mark from open builds. I may add my own touches but mainly this is to see how Aluminum plates perform
Sphinx 55 on MGN12 linear rails
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
My machine is a combination of the Openbuilds Sphinx 55, MGN12 linear rails knockoffs and custom made plates made by Chris Laidlaw
H-Bot CoreXY Cube
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Dead build.
![Standalone Torch Height Controller for CNC Plasma Cutting](https://openbuilds.com/data/article_images/l/9/9571.jpg?t=1601852808)
Build Author
Retsaj
Views
52136
Standalone Torch Height Controller for CNC Plasma Cutting
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A Torch Height Controller helps improve plasma cut quality and can save a CNC Machine from crashing. This design doesn't require you to know electronics or need any custom circuits... Its plug and play! This is a COMPLETELY standalone controller with a built-in Driver powerful enough to run just about any stepper motor. (maybe a little to powerful for a NEMA17)
![V-Slot™ X -Y Stage Hidden Acme Rod Example](https://openbuilds.com/data/article_images/l/0/66.jpg?t=1389473440)
Build Author
Mark Carew
Views
51235
V-Slot™ X -Y Stage Hidden Acme Rod Example
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
An X-Y Stage created from two self contained acme screw linear actuators. This build was published as an example of how many of the OpenBuilds Parts can be used.
Salmon Sphinx 1.0
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A tribute build based on Kyo's wonderful CBeam Sphinx. My hope is to improve on that build slightly, but to be honest, I'll probably just screw it up. I'll use this build to publicly document my failures.
![UK40OB](https://openbuilds.com/data/article_images/l/3/3988.jpg?t=1475587757)
Build Author
Ariel Yahni
Views
50508
UK40OB
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Modifying the K40 laser cuter stock gantry in favor of OpenBuilds superior and smoother movement. Also will provide me a better level control for easier beam alignment.
Hot Wire 4 Axis CNC Foam cutter
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
This build uses drawer slides and thread rod to create foam wings and fuselages by passing a hot wire through the foam which makes very accurate shapes. I built a Radio Controlled SuperVC10 using foam but did have a cnc machine then so I had to make many templates to guide the hot wire. This inspired me to build a cnc hot wire cutter. Works really well and have made several RC models with it now
C-BEAM-GTC
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Building a larger C-BEAM CNC Machine with no previous experience.
Openbuilds Co2 80w Laser Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Co2 80 watt openbuilds laser cutter, 1200mm laser tube, 1500x1000x500mm dimensions. Build frame first and then panels to be added.
Rotary Axis OX Derivitive
![](https://openbuilds.com/data/article_cat_images/s/0/297.jpg?t=1376658449)
A Rotary Axis CNC router based on the OX CNC Router
Hedge trimmer
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=1389472559)
This is a machine to trim and horizontal cutting hedges.
![OpenBuilds Sphinx 55 (20](https://openbuilds.com/data/article_images/l/7/7197.jpg?t=1529019228)
Build Author
Mark Carew
Views
47263
OpenBuilds Sphinx 55 (20" x 20")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds Sphinx 55 - 500x500 Lead Screw Machine
![V-Slot SphereBot](https://openbuilds.com/data/article_images/l/0/57.jpg?t=1389473428)
Build Author
Mark Carew
Views
47152
V-Slot SphereBot
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
This SphereBot is based on the EggBot which is an open-source art robot (drawbot) that can draw on spherical or egg-shaped objects.
![Core-XY Cube](https://openbuilds.com/data/article_images/l/3/3536.jpg?t=1465995594)
Build Author
alan richard
Views
45394
Core-XY Cube
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
An enclosed cube shaped 3D printer using CoreXY motion. Fabricated from V slot extrusion, standard extrusion, aluminium plate and acrylic sheet using basic workshop tools. Using standard RAMPS/ Reprap electronics. Technically a 'Repstrap' currently used to build a true 'Reprap'
![Niko’s Egg-painter robot (OpenBuilds)](https://openbuilds.com/data/article_images/l/1/1953.jpg?t=1427845771)
Build Author
gianakop
Views
43570
Niko’s Egg-painter robot (OpenBuilds)
![](https://openbuilds.com/data/article_cat_images/s/0/278.jpg?t=0)
This EggBot design has a perfect functionality (the same as the original EggBot professional), a perfect cable and microcontroller arrangement, and a perfect cost as it uses a minimum list of parts (with one V-Slot Linear Rail size20mm x 80mm and length 500mm you can build 3 EggBots!)
CoreXY Enclosed
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A compact, enclosed Core XY design, based on off-the-shelf parts.
Custom build 80w Co2 Laser Cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
Building a custom made 80W Co2 Laser cutter. Making it from scratch and it's a work in progress but I've learned a lot and I'll be sharing a bit of that knowledge with you guys since I've learned a lot from here.
![Triple C-Bot](https://openbuilds.com/data/article_images/l/1/1757.jpg?t=1439584213)
Build Author
adamcooks
Views
41919
Triple C-Bot
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=1389472082)
Based on the work of Carl Feniak and his C-Bot. A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy. Utilizing a 300x300 build plate this derivation utilizes three lead screws, synced to a single motor via gt2 belt
![LINEAR RAIL SPHINX 55 (Blue OX plates)](https://openbuilds.com/data/article_images/l/9/9317.jpg?t=1588456683)
Build Author
that-jim
Views
41434
LINEAR RAIL SPHINX 55 (Blue OX plates)
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Machine based on Sphinx 55 built with linear rails.
Plasma cutter - 608 on steel tube version
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
CNC Plasma cutter: 608ZZ on steel square tube linear rollers Welded frame HDT2-15 Belt Drive Tradeweld Cut-40 Plasma cutter with converted hand torch Virtual Torch Height Control through inductive probing - open source electronics project
![The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build](https://openbuilds.com/data/article_images/l/2/2815.jpg?t=1453269930)
Build Author
Peter Oakes
Views
41264
The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
I have based this build on the OX build so I will not be going into too much detail of specefic assembly modules as they asre so well covered by Mark Carew already, but will go through the complete build on video. I will be addig additional tutorials on steppers and the other electronic parts as needed though as this project is sponsored by RS Components in the form of most of the Electronics and this is also the key focus of my YouTube channel www.youtube.com/c/thebreadboardca.
![A simple XY laser engraver/cutter](https://openbuilds.com/data/article_images/l/4/4034.jpg?t=1487416994)
Build Author
HPB
Views
40178
A simple XY laser engraver/cutter
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
A simple low-cost XY plane laser engraver/cutter inspired by the Much 4 laser build, with minimal parts and assembly time. Uses standard off the shelf components in almost 90% of the build with the exception of the axes motor and wheel mounts which need to be 3D printed.
DIY CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=1389472260)
In this project, I show you how I built my DIY CNC machine. All moving parts of the DIY CNC router are running on ball bearings while the structural parts are made with natural materials, namely birch plywood and solid beech wood.
![CNC Router Lathe](https://openbuilds.com/data/article_images/l/2/2145.jpg?t=1466800036)
Build Author
Rakmup
Views
39416
CNC Router Lathe
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
Steel square tube frame with dual feed gantry and indexing lathe section. Will have 36" x 30" x 6" travel. Has a Harmonic Drive on the 4th Axis.
Charging Ox CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A heavily modified Ox CNC build to replace SO2.
![V-Slot Laser cutter and engraver](https://openbuilds.com/data/article_images/l/2/2617.jpg?t=1442812649)
Build Author
Yoshiya Arii
Views
38828
V-Slot Laser cutter and engraver
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
The Smart Laser Mini is an open source such as use Raspberry pi. Easy to assemble type of desktop laser cutter and engraver. Also we used V-slot
CoreXY W/ Fixed Build Plate & Enclosure
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Building a Core XY printer with a fixed build plate from off the shelf parts.
Double D-Bot 400mm x 400mm x 600mm
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Based on D-Bot but used more metal bracing / openbuild plates instead of plastic parts. Also size was increased.
![7050 Sphinx](https://openbuilds.com/data/article_images/l/5/5331.jpg?t=1520298636)
Build Author
Michael.M
Views
35868
7050 Sphinx
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is a Kyo Sphinx CNC Router build. Working Area: 350mm X 500mm Link to original design: https://openbuilds.com/builds/c-beam-sphinx.3605/
![Dash-X 3D Printer: Innovative design](https://openbuilds.com/data/article_images/l/8/8551.jpg?t=1558461111)
Build Author
Neil Rosenberg
Views
35316
Dash-X 3D Printer: Innovative design
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Cross-beam Cartesian 3d printer with dual master/slave lightweight fiberglass drive shafts, BMG style extruder with Bowden (Capricorn) tubing. Hot end is Creality Ender 3 style with two fans and BLTouch for autoleveling. Filament runout sensor is also included.
Software speed control of a brushless dc (Bldc) motor from Mach3.
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
Although this build is typically Mach3 related there is no reason it cannot be adapted for use with any machine control software which provides a PWM spindle control output. As an addition, an option has now been added which will enable the interface to manually control outrunner speed without the need for a PWM signal.
CoreXY Cubish
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A dual extrusion CoreXY printer with a 290 X 290mm build volume built entirely out of 2020 aluminum extrusion and using openbuilds mini-carriages for motion.
![UltiBots CB3030 CNC Router](https://openbuilds.com/data/article_images/l/3/3597.jpg?t=1467332619)
Build Author
UltiBots
Views
34410
UltiBots CB3030 CNC Router
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The UltiBots CB3030 CNC uses C-Beam, V-Slot and an extruded aluminum T-Slot work table. This allows 6mm T-Nuts, step clamps and blocks to secure materials to the work surface. The all metal design makes the use of a mister possible.
![Openbuilds Table Top 50w Co2 Laser Cutter/Engraver](https://openbuilds.com/data/article_images/l/8/8688.jpg?t=1562369052)
Build Author
pedrofernandez
Views
34038
Openbuilds Table Top 50w Co2 Laser Cutter/Engraver
![](https://openbuilds.com/data/article_cat_images/s/0/303.jpg?t=0)
DIY build of a Co2 Laser cutter/engraver 12x24 working area.
![Plasma cutting table](https://openbuilds.com/data/article_images/l/3/3528.jpg?t=1465474923)
Build Author
mytechno3d
Views
33709
Plasma cutting table
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
This is our plasma cutting table , based on the famous OX CNC . Can cut up to 15 mm ( steel , stainless , aluminium ) with a really good accuracy and at a really high speed .
![Workbee CNC Router/Laser/Plotter](https://openbuilds.com/data/article_images/l/7/7966.jpg?t=1552235073)
Build Author
Leonard Cross
Views
33667
Workbee CNC Router/Laser/Plotter
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
A CNC machine with an expansive 30x30" work area, supporing a router, laser, simple plotting and work monitoring camera. Control includes a tethered control box, game controller style jog control, and relay controlled AC outlets for all appliances. Accessories include a 3D printed dust shoe, a complete spoilboard and hold down system, an XYZ touch probe and multiple vacuum retention boards to support full profile routing.
![Triple Shot R-P-M Area 51 CNC Parts](https://openbuilds.com/data/article_images/l/2/2307.jpg?t=1444529606)
Build Author
Hytech2k
Views
32472
Triple Shot R-P-M Area 51 CNC Parts
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/303.jpg?t=1451692706)
We wanted to create a rapid prototyping machine with excellent 3D printing, laser cutting and engraving, and light CNC router work capabilities.
![OneZ i3](https://openbuilds.com/data/article_images/l/3/3389.jpg?t=1460922236)
Build Author
Keith Davis
Views
32453
OneZ i3
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A quiet, 8inx8in build area, Cartesian printer with permanently level bed. This is a compact, solid, inexpensive printer that will reliably print any type filament for thousands of hours while you sleep, fish, or play ball in the park.
![PhlatPrinter MK 3](https://openbuilds.com/data/article_images/l/5/5207.jpg?t=1497557010)
Build Author
Mark Carew
Views
32402
PhlatPrinter MK 3
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Phlatprinter 3 was designed to be used in a small shop with the ability to cut large sheets of foam for RC airplane projects. The idea was that you could save all of your aircraft as models and tweak to perfection after every flight.
![Modular DIY CNC Machine](https://openbuilds.com/data/article_images/l/6/6140.jpg?t=1516590691)
Build Author
jtaggard
Views
32346
Modular DIY CNC Machine
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This modular CNC machine is based on the OpenBuilds ACRO System, however I wanted something that did more than just laser engrave. So I designed my machine using the same style as the ACRO but with some upgrades such as an actual Z-axis and the ability for multiple tool attachments.
![Routy GT2 290 BSX CNC Router, Low Cost and Good!](https://openbuilds.com/data/article_images/l/2/2434.jpg?t=1439915037)
Build Author
Ronald van Arkel
Views
32267
Routy GT2 290 BSX CNC Router, Low Cost and Good!
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
The Routy GT2 300 BSX CNC Router is a Low Cost CNC build. It performs the same as the larger Routy's from OpenBuilds but doesn't break the bank!
![C3DO](https://openbuilds.com/data/article_images/l/5/5957.jpg?t=1511666318)
Build Author
crypt-tek
Views
32198
C3DO
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
My first 3D printer build. It is almost complete and will be posting the first completed print shortly. I still need to mount the print spools and a couple other odd ends to complete this.
![3D Printer](https://openbuilds.com/data/article_images/l/0/225.jpg?t=1389473508)
Build Author
Cuong Vu
Views
31747
3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
It took me 18 long nights to build it
Suitcase Vacuumformer
![](https://openbuilds.com/data/article_cat_images/s/0/291.jpg?t=0)
Quick overview of my build up for a vacuum former that is self contained, portable and fairly easy to build.
V-Slot Miter Saw Stop
![](https://openbuilds.com/data/article_cat_images/s/0/295.jpg?t=0)
A quick and simple saw stop build.
![Mini Kossel V-Slot 3D Printer](https://openbuilds.com/data/article_images/l/0/720.jpg?t=1401248501)
Build Author
UltiBots
Views
30710
Mini Kossel V-Slot 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This build is very straight forward. The design is simple. There is a great support community for Delta 3D printers.
![Sphinx 1050](https://openbuilds.com/data/article_images/l/7/7822.jpg?t=1543130548)
Build Author
Kyo
Views
30663
Sphinx 1050
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
This is going to be a Sphinx 1050 build. Starting off as a stock kit build using industrial electronics and opensource control software. Mods and upgrades to follow.
![OX Based cnc 3000 x 1500 Double belt](https://openbuilds.com/data/article_images/l/4/4037.jpg?t=1476802440)
Build Author
sebf34
Views
30372
OX Based cnc 3000 x 1500 Double belt
![](https://openbuilds.com/data/article_cat_images/s/0/286.jpg?t=0)
OX Based CNC
TrueUp Glide
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also synchronizes two Z axis screws with a timing belt for a level lift. The ratio of the drive pulley and Z axis pulleys produce .005 lift per full step on a 200 step motor, eliminating layer resolution "drift" caused by microstepping.
![MakerSL MSL-5 Cantilevered 3D Printer](https://openbuilds.com/data/article_images/l/3/3179.jpg?t=1466722048)
Build Author
Sonny Lowe
Views
29547
MakerSL MSL-5 Cantilevered 3D Printer
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
This is a simple cantilevered 3D Printer. It is designed around the OB V-Slot linear rails. I am trying to simplify this as much as possible, all rails will be 250mm long and only one will require cutting (it will be cut in half). The printer will use all OB wheels and gantry plates where applicable, all other plates can be either Laser Cut or 3D Printed (files will be provided for both). I am not set on electronic as of yet, but plan to use a single control board...no Arduino/Ramps control.
![Vacuum Forming Machine](https://openbuilds.com/data/article_images/l/5/5071.jpg?t=1495496199)
Build Author
rengelking
Views
29129
Vacuum Forming Machine
![](https://openbuilds.com/data/article_cat_images/s/0/291.jpg?t=0)
Vacuum Former built with off-the-shelf parts, works perfectly every time!
![OpenBuilds Sphinx 1050 (20](https://openbuilds.com/data/article_images/l/7/7196.jpg?t=1529007338)
Build Author
Mark Carew
Views
28960
OpenBuilds Sphinx 1050 (20" x 40")
![](https://openbuilds.com/data/article_cat_images_nondefault/s/0/316.jpg?t=1529427459)
The OpenBuilds Sphinx 1050 - 500x1000 Lead Screw Machine
![OpenXY](https://openbuilds.com/data/article_images/l/2/2911.jpg?t=1448854520)
Build Author
Keith Davis
Views
28729
OpenXY
![](https://openbuilds.com/data/article_cat_images/s/0/272.jpg?t=0)
Combines the layout factor of a CoreXY while using Cartesian logic. The design has a fixed build plate - moving an X/Y frame on the Z axis enclosed by an outer main frame.
![Loading...](styles/uix/xenforo/widgets/ajaxload.info_B4B4DC_facebook.gif)